Netgear 06200047 ユーザーズマニュアル
Reference Manual for the Mobile Broadband Router MBR814X
7-7
v2.0 BETA, January 2006
2. From the main menu, under Advanced, click the LAN IP Setup link to go to the LAN IP Setup
page:
3. .Enter the TCP/IP, DHCP, or Reserved IP parameters.
4. Click Apply to save your changes.
Using Static Routes
Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
Static Route Example
As an example of when a static route is needed, consider the following case:
•
Your primary Internet access is through a cable modem to an ISP.
•
You have an ISDN router on your home network for connecting to the company where you are
employed. This router’s address on your LAN is 192.168.0.100.
employed. This router’s address on your LAN is 192.168.0.100.
•
Your company’s network is 134.177.0.0.
Figure 7-3