Netgear 06200051 ユーザーズマニュアル

Chapter 3-1

This chapter provides information about troubleshooting your Wireless USB 2.0 Adapter. After 
each problem description, instructions are given to help you diagnose and solve the problem. For 
information about connecting to wireless networks and the Internet, see 

.

Also, for problems with accessing network resources, the Windows software might not be installed 
and configured properly on your computers. Please refer to the link to 

.

Use the information below to solve common problems you may encounter. Also, please refer to the 
knowledge base on the NETGEAR website at 

. 

Unless you can solve a problem right away, go online and upgrade to the latest firmware for your 
adapter, using the link above.

I can connect to an 
access point, but I 
cannot connect to 
other computers on 
the network or the 
Internet.

This could be a 
physical layer problem 
or a network 
configuration problem.

Check to make sure that the access point is physically 
connected to the Ethernet network.
Make sure that the IP addresses and the Windows networking 
parameters are all configured correctly.
Restart the cable or DSL modem, router, access point, and 
notebook PC.
Refer to 

 for additional suggestions.