Netgear 09400126 ユーザーズマニュアル

2-8

Wireless Configuration

•

WPA-PSK [TKIP] + WPA2-PSK [AES]. 

•

WPA/WPA2 Enterprise. TKIP encryption type with authentication from a RADIUS 
server.

The content displayed in the screen depends on the WPA setting that you selected.  

4. Depending on the WPA settings that you select, enter the required information:

•

For WPA-PSK or WPA2-PSK, enter the pre-shared key, which is a passphrase between 
8 and 63 characters.

•

For WPA, enter the settings for the RADIUS Server:

–

Primary Radius Server IP Address. The IP address of the RADIUS server. The 
default is 0.0.0.0.

–

Radius Port. Port number of the RADIUS server. The default is 1812.

–

Shared Key. This is shared between the wireless access point and the RADIUS server 
while authenticating the supplicant.

5. Click Apply to save your settings.

If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure 
the gateway’s SSID and security settings and, at the same time, connect the wireless client securely 
and easily to the gateway. Look for the 

symbol on your client device (computers that will 

connect wirelessly to the gateway are clients). WPS automatically configures the network name 
(SSID) and wireless security settings for the gateway (if the gateway is in its default state) and 
broadcasts these settings to the wireless client.

Some considerations regarding WPS are:

•

WPS supports only WPA-PSK and WPA2-PSK wireless security. WEP security is not 
supported by WPS.

Note: NETGEAR’s Push 'N' Connect feature based on the Wi-Fi Protected Setup 

). All other Wi-

Fi-certified and WPS-capable products should be compatible with NETGEAR 
products that implement Push 'N' Connect.