Netgear 11200165 ユーザーズマニュアル
Chapter 4: Managing Your Network
|
39
Mobile Broadband 11n Wireless Router MBR1000
Showing Statistics
Click the Show Statistics button on the Router Status screen to display router usage
statistics:
statistics:
WAN Port
Connection Status
The status of the Internet connection.
IP Address
The IP address used by the modem. If no address is shown,
the router cannot connect to the Internet.
the router cannot connect to the Internet.
Protocol
The protocol for the Internet connection, which is PPP
(Point-to-Point).
(Point-to-Point).
IP Subnet Mask
The IP subnet mask used by the router’s USB port.
Gateway IP Address The IP address used by the router.
Domain Name
Server
Server
The DNS server IP addresses used by the router. These
addresses are usually obtained dynamically from the ISP.
addresses are usually obtained dynamically from the ISP.
LAN Port
MAC Address
The Ethernet MAC address used by the router’s LAN port.
IP Address
The LAN port IP address. The default is 192.168.0.1.
DHCP
• Off: The router will not assign IP addresses to PCs on the
LAN.
• On: The router assigns IP addresses to PCs on the LAN.
IP Subnet Mask
The LAN port IP subnet mask. The default is 255.255.255.0.
Wireless Port
(See “Manually
Configuring Your
Wireless Settings”
on page
(See “Manually
Configuring Your
Wireless Settings”
on page
Name (SSID)
The service set ID, also known as the wireless network name.
Region
The country where the unit is set up for use.
Channel
The current channel, which determines the operating
frequency.
frequency.
Wireless AP
Indicates if the access point feature is disabled or not. If not
enabled, the Wireless LED on the front panel will be off.
enabled, the Wireless LED on the front panel will be off.
Broadcast Name
Indicates if the router is configured to broadcast its SSID.
Table 4. Router Status Fields (Continued)
Field
Description