Netgear 12100187 ユーザーズマニュアル

The PIN method displays this screen so you can enter the client security PIN number:

While the router attempts to connect, the WPS LED on the front of the router blinks green. 
When the router establishes a WPS connection, the LED is solid green, and the router 
WPS screen displays a confirmation message. 

Repeat to add another WPS client to your network.

Wireless Settings Screen

The Wireless Settings screen lets you view or change the wireless network settings. When 
you set up security, note the new settings and save them in a secure location.

If you use a wireless computer to change the wireless network name 

(SSID) or security options, you are disconnected when you click 
Apply. To avoid this problem, use a computer with a wired 
connection to access the router.

Consider Every Device on Your Network

Before you begin, check the following:

Every wireless computer has to be able to obtain an IP address by DHCP from the router 
as described in 

Each computer or wireless adapter in your network has to have the same SSID and 

wireless mode (bandwidth/data rate) as the router. Check that the wireless adapter on 
each computer can support the mode and security option you want to use.

The security option on each wireless device in the network has to match the router. For 

example, if you select a security option that requires a passphrase, be sure to use same 
passphrase for each wireless computer in the network.