Netgear 12100193 ユーザーズマニュアル
Chapter 1. Getting Started
|
4
1
1.
Getting Started
Hardware Features
Front Panel
The WNCE3001 has one LED, which indicates the power and wireless connection status.
LED Status
Activity
Link
LED
LED
OFF
Unit is not powered.
Solid Red
Link quality is poor, based on the link
rate, or the USB does not supply
enough power.
rate, or the USB does not supply
enough power.
Blinking Red
If the LED blinks red at the rate of 0.5
seconds on, 0.5 seconds off, the
firmware is corrupt. See the User
Manual for instructions.
seconds on, 0.5 seconds off, the
firmware is corrupt. See the User
Manual for instructions.
Solid Amber
Link quality is fair, based on the link
rate.
rate.
Blinking
Amber
Amber
System is booting up, or has been
reset. The LED starts to blink amber
after the
reset. The LED starts to blink amber
after the
Reset button has been
pressed more than 5 seconds. The LED
also blinks amber during a firmware
upgrade.
also blinks amber during a firmware
upgrade.
Solid Green
Unit is powered on, and the link
quality is good, based on the link rate.
quality is good, based on the link rate.
Blinking
Green
Green
Boot up is complete, but no wireless
connection is established, so no IP is
obtained.
connection is established, so no IP is
obtained.