Netgear 13200232 ユーザーズマニュアル
Advanced Settings
108
N450 Wireless Router WNR2500
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
IPv6 Auto Detect
To set up an IPv6 Internet connection through auto detection:
1.
Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
The IPv6 screen displays.
2.
Select Auto Detect from the menu.
The screen adjusts:
The screen adjusts:
The information in the following fields is automatically detected by the router:
•
Connection Type
. This field indicates the connection type that is detected.
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.