Netgear 13200232 ユーザーズマニュアル

Select Advanced > Advanced Setup > Wireless Settings. 
The Advanced Wireless Settings screen displays.

Select the Enable Router's PIN check box.

Click the Apply button.

If you are unable to log in to the router from a computer on your local network, check the 

following:

If you are using an Ethernet-connected computer, check the Ethernet connection 

between the computer and the router as described in the previous section.

Make sure that your computer’s IP address is on the same subnet as the router. If you are 

using the recommended addressing scheme, your computer’s address should be in the 

range of 192.168.1.2 to 192.168.1.254. 

If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and 

Mac OS generate and assign an IP address if the computer cannot reach a DHCP server. 

These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in 

this range, check the connection from the computer to the router, and reboot your 

computer.

If your router’s IP address was changed and you do not know the current IP address, 

clear the router’s configuration to factory defaults. This sets the router’s IP address to 

192.168.1.1. This procedure is explained in 

137.

Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using 

Internet Explorer, click the Refresh button to be sure that the Java applet is loaded.

Try quitting the browser and launching it again.

Make sure that you are using the correct login information. The factory default login name 

is admin, and the password is password. Make sure that Caps Lock is off when you enter 

this information.

If you are attempting to set up your NETGEAR router as an additional router behind an 

existing router in your network, either configure the NETGEAR router to function as an 

existing router with the NETGEAR router. 

If you are attempting to set up your NETGEAR router as a replacement for an ADSL 

gateway in your network, the router cannot perform many gateway services, for example, 

converting ADSL or cable data into Ethernet networking information. NETGEAR does not 

support such a configuration.

If you can access your router but you are unable to access the Internet, first determine 

whether the router can obtain an IP address from your Internet service provider (ISP). Unless