Netgear 13200232 ユーザーズマニュアル

Click the Apply button.
The Advanced Wireless Settings screen displays.

Select the Turn off wireless signal by schedule check box to activate the schedule.

Click the Apply button.

You can control how WPS functions on the router. NETGEAR recommends that you use 

caution changing the WPS settings.

For information about how to use WPS to add wireless devices and 

other equipment to your wireless network, see 

You cannot set up the WPS settings when the security is WEP. Make sure that the security 

mode is WPA-PSK, WPA2-PSK, or WPA-PSK + WPA2-PSK Mixed Mode. For information 

28.

You can do the following with the router’s PIN:

Disable the PIN entirely.

Change the number of times that a PIN connection is allowed to fail before the PIN is 

automatically disabled. By default, the PIN is automatically disabled after three failed 

connection attempts. If the PIN is automatically disabled, it remains so until you restart 

the router. While the PIN is disabled, the WPS LED blinks slowly.

Turn off automatic disabling of the PIN. 



Select Advanced > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
The router’s PIN is shown for information only. It cannot be changed.

(Optional) Clear the  Enable Router’s PIN check box to disable the router’ s PIN entirely. 
By default, the PIN is enabled, but there might be situations in which you want to disable 

the PIN.

(Optional) Under the Enable Router's PIN check box, type a number in the field to change 

the number of times that a PIN connection can fail.
You can change this setting only when the PIN is enabled. By default, the number is 3.

(Optional) Clear the check box  under the Enable Router ’s PIN check box to t urn off 

automatic disabling of the PIN.