Netgear 13300237 ユーザーズマニュアル
Wireless Configuration
19
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
8.
On the computer that just joined the wireless network, make sure you can connect to the
Internet.
Internet.
You should see the gateway’s Internet LED blink, showing that the Internet connection is
in use.
in use.
Set Up Wi-Fi Multimedia
You can use the Wi-Fi Multimedia (WMM) screen to set up wireless multimedia Quality of
Service (QoS).
Service (QoS).
To set up Wi-Fi Multimedia:
1.
Log in to the gateway.
2.
In the main menu, under Setup, select Wi-Fi Multimedia.
3.
Specify the Wi-Fi Multimedia settings for either the 2.4 GHz or 5 GHz network or both.
•
WMM Support. Select On to enable WMM.
•
No-Acknowledgement. Select Off if you want to use Acknowledgement (ACK)
messages. Select On if you do now want to use acknowledgement messages.
messages. Select On if you do now want to use acknowledgement messages.
Usually, Off is selected which might improve the efficiency of packet transmission. If
wireless communication quality is poor at your location, select On so that you are
notified when a package is lost. High interference levels can cause poor
communication.
wireless communication quality is poor at your location, select On so that you are
notified when a package is lost. High interference levels can cause poor
communication.
•
Power Save Support. To conserve battery power in smaller devices that are
connected to the gateway, select On.
connected to the gateway, select On.
4.
Click Apply.