Netgear 14200280 ユーザーズマニュアル

Model EX7000

Quick Start Guide

Hardware

Front Panel and Side Panel

Rear Panel

Indicator LEDs

After installing your extender, locate the serial number on the label and use it to register your product at 

. You must register your product 

before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. 
For product updates and web support, visit 

.

You can get the user manual online at 

 or through a link in the product’s user interface.

NETGEAR recommends that you use only the official NETGEAR support resources.

For the current EU Declaration of Conformity, visit: 

. 

For regulatory compliance information, visit 

http://www.netgear.com/about/regulatory/

. 

See the regulatory compliance document before connecting the power supply.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United 
States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their 
respective holders. © NETGEAR, Inc. All rights reserved.

This LED indicates the 2.4 GHz WiFi connection 
between the extender and the router.
Solid green. Best connection

Solid amber. Good connection

Solid red. Poor connection

Off. No connection
This LED indicates the 5 GHz WiFi connection 
between the extender and the router.
Solid green. Best connection

Solid amber. Good connection

Solid red. Poor connection

Off. No connection
Solid green. The extender and device are 

connected.

       

Solid green. The Ethernet port has detected an 

Ethernet link with the extender.

Solid green. A USB device is connected to the 

extender.

2.4 GHz Link 
Rate LED

5 GHz Link Rate 
LED

Device to 
Extender LED

Ethernet ports 
1–5 LEDs

USB LEDs