Netgear FWG114P v2 ユーザーズマニュアル

NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328

H-3

DynDNS service. Gateway B will use the DDNS Service Provider when establishing a VPN 
tunnel. 

In order to establish VPN connectivity Gateway A must be configured to use Dynamic DNS, and 
Gateway B must be configured to use a DNS hostname to find Gateway A provided by a DDNS 
Service Provider. Again, the following step-by-step procedures assume that you have already 
registered with a DDNS Service Provider and have the configuration information necessary to set 
up the gateways.

1.

Log in to the FVS318 or FVM318 labeled Gateway A as in the illustration.

Out of the box, the FVS318 or FVM318 is set for its default LAN address of 

 

 with its default user name of 

 and default password of 

. 

For this example we will assume you have set the local LAN address as 10.5.6.1 for Gateway 
A and have set your own password.

2.

Click Dynamic DNS on the left side of the Settings management GUI.

3.

Access the Web site of one of the dynamic DNS service providers whose names appear in the 
‘Use a dynamic DNS service’ list, and register for an account.

 

For example, for dyndns.org, click the link or go to www.dyndns.org.