Netgear WG102 ユーザーズマニュアル
Reference Manual for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point
3-11
Basic Installation and Configuration
October 2004
How to Log In to the WG102 Using Its Default IP Address
1.
192.168.0.229 is the default IP address of your access point. The WG102 is set, by default, the
DHCP client to be disabled.
DHCP client to be disabled.
Note: The computer you are using to connect to the WG102 should be configured with an IP
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
2.
Open a Web browser such as Internet Explorer or Netscape Navigator.
3.
Connect to the WG102 by entering its default address of
http://192.168.0.229
into your
browser.
4.
A login window like the one shown below opens:
Figure 3-6: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find
the WG102 Access Point and display the home page, as shown in
the WG102 Access Point and display the home page, as shown in
“Login result: WG102 home
page” on page 3-7
.