Netgear wgr101 ユーザーズマニュアル

2-2

Introduction

The WGR101 wireless travel router includes an 802.11g wireless access point, providing 
continuous, high-speed 54 Mbps access between your wireless and Ethernet devices. The access 
point provides:

•

802.11g wireless networking at up to 54 Mbps.

•

802.11g wireless networking, with the ability to operate in 802.11g-only, 802.11b-only, or 
802.11g and b modes, providing backwards compatibility with 802.11b devices or dedicating 
the wireless network to the higher bandwidth 802.11g devices.

•

64-bit and 128-bit WEP encryption security.

•

WEP keys can be generated manually or by passphrase.

•

WPA-PSK support. Support for Wi-Fi Protected Access (WPA) data encryption which 
provides strong data encryption and authentication based on a pre-shared key.

•

Wireless access can be restricted by MAC address.

•

Wireless network name broadcast can be turned off so that only devices that have the network 
name (SSID) can connect.

The WGR101 wireless travel router is equipped with several features designed to maintain 
security, as described in this section.

•

Computers Hidden by NAT

 

NAT opens a temporary path to the Internet for requests originating from the local network. 
Requests originating from outside the LAN are discarded, preventing users outside the LAN 
from finding and directly accessing the computers on the LAN.

Autosensing Ethernet Connections with Auto Uplink 

With its internal 8-port 10/100 switch, the WGR101 can connect to either a 10 Mbps standard 
Ethernet network or a 100 Mbps Fast Ethernet network. Both the LAN and WAN interfaces are 
autosensing and capable of full-duplex or half-duplex operation.