Netgear wgr101 ユーザーズマニュアル

4-10

Wireless Configuration

5.

You can manually or automatically program the four data encryption keys. These values must 
be identical on all computers and Access Points in your network.

•

Automatic - Enter a word or group of printable characters in the Passphrase box and click 
the Generate button. The passphrase is case sensitive; NETGEAR is not the same as 
nETgear. The four key boxes will be automatically populated with key values.

•

Manual - Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F). These entries 
are not case sensitive; AA is the same as aa.

 

Select which of the four keys will be active.

Please refer to 

 for a full explanation of each of these 

options, as defined by the IEEE 802.11 wireless communication standard.

6.

Click Apply to save your settings.

To restrict access based on MAC Addresses, follow these steps:

1.

Log in to the WGR101 firewall at its default LAN address of 

 with its 

default user name of admin and default password of password, or using whatever LAN 
address and password you have set up.

2.

Click Advanced Wireless Setup in the main menu of the WGR101 firewall.

3.

From the Wireless Settings menu, click Setup Access List to display the Wireless Access 
menu shown below.

When configuring the firewall from a wireless computer whose MAC address is 

not in the Trusted PC list, if you select Turn Access Control On, you will lose your 
wireless connection when you click on Apply. You must then access the wireless travel 
router from a wired computer or from a wireless computer which is on the access control 
list to make any further changes.