Netgear wgr101 ユーザーズマニュアル
Network Configuration
6-1
May 2004 (202-10034-01)
Chapter 6
Network Configuration
This chapter describes how to configure the advanced features of your 54 Mbps Wireless Travel
Router WGR101 . If the WGR101 switch is set at position 2 for multiple users, or position 3 for
configuration, you can access this feature. It can be found under the Advanced heading in the Main
Menu of the browser interface.
Router WGR101 . If the WGR101 switch is set at position 2 for multiple users, or position 3 for
configuration, you can access this feature. It can be found under the Advanced heading in the Main
Menu of the browser interface.
Wireless Login to the Wireless Travel Router
When you want to customize the network settings of your wireless travel router, when in
multi-user mode (switch position 3), you can wirelessly connect to the router to change its settings.
multi-user mode (switch position 3), you can wirelessly connect to the router to change its settings.
Follow these procedures to log in to the wireless travel router.
Figure 6-1: Switch position 2
1.
Set the switch to position 2.
Note: This procedure will work with the switch in position 3 as well. However, the login
process will lead to the Basic Settings page when the switch is in position 2 rather leading to
the Wireless Settings page when the switch is in position 3. In either case, you have full access
to all the configuration pages in the wireless travel router.
process will lead to the Basic Settings page when the switch is in position 2 rather leading to
the Wireless Settings page when the switch is in position 3. In either case, you have full access
to all the configuration pages in the wireless travel router.
2.
Connect the power cord to the wireless travel router and plug it into an outlet. The Power LED
lights up.
lights up.
Check the status lights and verify the following:
3WITCH