Netgear WGR614v2 ユーザーズマニュアル
Reference Manual for Cable/DSL Wireless Router WGR614
2-8
Connecting the Router to the Internet
c.
When the router successfully detects an active Internet service, the router’s Internet LED
goes on. The Setup Smart Wizard reports which connection type it discovered, and
displays the appropriate configuration menu. If the Setup Smart Wizard finds no
connection, you will be prompted to check the physical connection between your router
and the cable or DSL line.
goes on. The Setup Smart Wizard reports which connection type it discovered, and
displays the appropriate configuration menu. If the Setup Smart Wizard finds no
connection, you will be prompted to check the physical connection between your router
and the cable or DSL line.
d.
The Setup Smart Wizard will report the type of connection it finds. The options are:
•
•
Connections which require a login using protocols such as
PPPoE, PPTP, Telstra, or Bigpond broadband connections.
•
Connections which use dynamic IP address assignment.
•
Connections which use fixed IP address assignment.
The procedures for filling in the configuration menu for each type of connection follow
below.
below.
PPPoE Smart Wizard-Detected Option
If the Setup Smart
Wizard discovers that your ISP uses PPPoE, you will see this menu:
Figure 2-7: Setup Smart
Wizard menu for PPPoE accounts
•
Enter the Account Name, Domain Name, Login, and Password as provided by your ISP. These
fields are case sensitive. The router will try to discover the domain automatically if you leave
the Domain Name blank. Otherwise, you may need to enter it manually.
fields are case sensitive. The router will try to discover the domain automatically if you leave
the Domain Name blank. Otherwise, you may need to enter it manually.