Microsoft Corporation BH-222 ユーザーズマニュアル

Pair and connect your headset

Before using the headset, you must pair and connect it with a compatible device.
Make sure your headset is switched off, and your phone is switched on.
1. If you have never paired the headset, or you have cleared the pairings, switch the headset on.

Otherwise, to enter pairing mode, press and hold for 5 seconds until the green indicator light starts

to flash quickly.

2. Within 3 minutes, switch on Bluetooth on your phone, and search for Bluetooth devices. For details,

see the user guide of your phone.

3. Select your headset from the list of devices found.

4. If necessary, type in the passcode 0000.

5. When the headset is paired and ready for use, the green indicator light flashes every 5 seconds.
The next time you switch on the headset, it automatically connects to the last connected device.
You can pair your headset with 8 compatible phones, but you can only connect it to a maximum of 2

phones at the same time. With some devices, you may need to make the connection separately after

pairing.