Microsoft Corporation RM-469X ユーザーズマニュアル

Your battery has been partially charged at the factory. If

the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger plug to the USB port in the device.

3. When the device indicates a full charge, disconnect the

charger from the device, then from the wall outlet.

You do not need to charge the battery for a specific length

of time, and you can use the device while it is charging. If

the battery is completely discharged, it may take several

minutes before the charging indicator appears on the

display or before any calls can be made.

Charging with the USB data cable is slower than charging

with the charger. Charging with the USB data cable may

not work if you use a USB hub. USB hubs may be

incompatible for charging a USB device.
Charging with the USB data cable may take a long time if

the battery is completely discharged.
When the USB data cable is connected, you can transfer

data at the same time as charging.

1. Connect a compatible USB device to your device using

a compatible USB data cable.
Depending on the type of the device that is used for

charging, it may take a while for charging to start.

2. If the device is switched on, select from the available

USB modes.

Use a memory card to save the memory on your device.

You can also back up information from your device to the

memory card.
Use only compatible microSD and microSDHC cards

approved by Nokia for use with this device. Nokia uses

approved industry standards for memory cards, but some

brands may not be fully compatible with this device.

Incompatible cards may damage the card and the device

and corrupt data stored on the card.
Keep all memory cards out of the reach of small

children.
Check the compatibility of a memory card with

its manufacturer or provider.
A compatible memory card may be included in the

sales package. The memory card may be already

inserted in the device. If not, do the following:
1. To prevent the battery from coming loose, place the

device so that the back cover is facing up.

2. Remove the back cover.

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black