AeroScout CGSHGS1000 ユーザーズマニュアル
Introduction
1
Hugs® Wi-Fi Tag Charger User Guide
Introduction
Overview
The Hugs on MobileView software notifies the users when the Hugs Tag
battery is getting low. Placing the Hugs Tag in the charger erases all the
history data from the tag, including the Kisses® bonding and the tag
status. It also triggers MobileView to erase the specific patient admitting
information.
battery is getting low. Placing the Hugs Tag in the charger erases all the
history data from the tag, including the Kisses® bonding and the tag
status. It also triggers MobileView to erase the specific patient admitting
information.
Model Numbers
The Hugs Tag Charger part number:
• CGS-HGS-1000
Based on the power supply outlet type:
• CGS-HGS-1000-U U.S. outlet
• CGS-HGS-1000-E European outlet
• CGS-HGS-1000-J Japanese outlet
• CGS-HGS-1000-UK U.K. Outlet
• CGS-HGS-1000-E European outlet
• CGS-HGS-1000-J Japanese outlet
• CGS-HGS-1000-UK U.K. Outlet
Intended Use
The Hugs Wi-Fi Tag Charger is intended for facility staff who are using the
Hugs Wi-Fi Tags in conjunction with the MobileView security application.
Hugs Wi-Fi Tags in conjunction with the MobileView security application.
Safety Considerations
• Position any trailing wires so that they are not a trip hazard and are less
likely to get damaged.
• Check that the plug is not damaged and that the cable is properly
secured with no internal wires visible.
• Where there is evidence that the supply may not be safe, such as
damaged equipment or wiring, the supply should not be used until work
has been done to correct this.
has been done to correct this.
Documentation
Please refer to the following document for technical specifications for the
Hugs Wi-Fi Tag Charger.
Hugs Wi-Fi Tag Charger.
•
Hugs Wi-Fi Tag Charger Data Sheet p/n 0971-063-000