AeroScout EX3300 ユーザーズマニュアル
EX3300 Series Exciter Installation & Configuration Guide
Installing the Exciters
14
Installing the EX3300 in a GOJO TFX Dispenser
To open the dispenser:
Open the dispenser by pressing the large button situated on the bottom of
1.
the dispenser. This releases the (bottom) hinged outer casing of the
dispenser, from the back panel, allowing it to open forwards.
dispenser, from the back panel, allowing it to open forwards.
Note
Approach from the side, being careful to not activate the dispensing
mechanism.
To install the Exciter:
Remove the soap container if needed.
1.
Remove at least one of the batteries in the dispenser to disable the power.
2.
Insert the Exciter in the slot provided. A grey plug may be located in the
3.
connector slot. This plug must be removed before the Exciter can be
inserted.
inserted.