Radwin Ltd. RW2049 ユーザーズマニュアル

RADWIN 1000/2000/5000 User ManualVersion  2.5.30p3

4-23

maxODUTxPower denote the maximum Tx Power of the ODU, itself 

depending on the air rate used.

Then, the following relationship must be satisfied: 

 ... (*)

These parameters are controlled as follows:



1. Click the Configure buttons in turn to configure the antennas on both 

sides of the link. Each one offers a dialog like this:

2. Choose the antenna type and required transmission (Tx) power for the 

first site and click OK. Repeat the process for the second site.

The Tx power (per radio) indicates the power of each radio inside the 
ODU and is used for Link Budget Calculations. The Tx power (System) 
shows the total transmission power of the ODU and is used to calculate 
the EIRP according to regulations.

To see the relationship between Tx Power (radio) and TX Power (system), 
note that 

 so that if you double the power in 

milliWatts (for two radios) then dBm will increase by 

.



+

–

(

)



10

10

log



=

10

2

3



10

log

