Radwin Ltd. RW2058 ユーザーズマニュアル

RADWIN 1000/2000/5000 User ManualVersion  2.5.30p3

7-8

UAS – Unavailable 

Seconds

Seconds in which the interface was out of service.

ES – Errored Sec-

onds

The number of seconds in which there was at least 

one error block. Note that the notation of an error 

block is different per interface.

SES – Severe Errored 

Seconds

The number of seconds in which the service quality 

was low (the quality is different per type of inter-

face and determined by the BBER threshold per 

interface).

BBE – Background 

Block Error

The number of errored blocks in an interval.

Integrity

A flag indicating that the data was valid. Note that 

the Performance Monitoring data is not valid if not 

all the values were stored (e.g., due to clock 

changes within the interval or power up reset).

Max RSL

The maximum of the receive signal level (mea-

sured in dBm).

Min RSL

The minimum of the receive signal level (measured 

in dBm).

Max TSL

The maximum of the transmit signal level (mea-

sured in dBm).

Min TSL

The minimum of the transmit signal level (mea-

sured in dBm).

RSL Threshold 1

The number of seconds in which the RSL was 

below the specified threshold.

RSL Threshold 2

The number of seconds in which the RSL was 

below the specified threshold.

TSL Threshold

The number of seconds in which the RSL was 

above the specified threshold.

BBER Threshold

The BBER Threshold value counts the number of 

seconds in which the Background Block Error Ratio 

(BBER) exceeded the specified threshold. 

Received Bytes

The number of Megabytes received at the specified 

port within the interval

Transmitted Bytes

The number of Megabytes transmitted at the spec-

ified port within the interval.