CipherLab Co. Ltd. 3656CRADLE ユーザーズマニュアル
5
Update
錯誤
錯誤
錯誤
錯誤! ! ! ! 使用
使用
使用
使用 [[[[常用
常用
常用
常用] ] ] ] 索引標籤將
索引標籤將
索引標籤將
索引標籤將 Heading 1
Heading 1
Heading 1
Heading 1
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字。
。
。
。
CHARGING THE BATTERY
CHARGING THE BATTERY
CHARGING THE BATTERY
CHARGING THE BATTERY VIA
VIA
VIA
VIA 3656
3656
3656
3656 CRADLE
CRADLE
CRADLE
CRADLE
The battery may not be charged to full for shipment. When you first receive the package,
you will need to charge the battery to full before using the scanner. When using the
RS-232 cable, it takes approximately 5 hours to charge the battery to full (from the
power adaptor).
you will need to charge the battery to full before using the scanner. When using the
RS-232 cable, it takes approximately 5 hours to charge the battery to full (from the
power adaptor).
Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It
is recommended to charge the battery at room temperature (18°C to 25°C) for
optimal performance.
optimal performance.
1)
Install the battery to the scanner.
2)
Seat the scanner in the 3656 CRADLE stand.
3)
Connect the 3656 CRADLE stand to your computer or notebook via the USB or
RS-232 cable.
4)
Connect the power supply cord from 3656 CRADLE to a proper power outlet.
Warning:
RS-232/USB interface both require connecting the power supply cord.
When the stand is solely on USB power, the current may be insufficient for
it to function normally. You must connect the power supply cord.
When the stand is solely on USB power, the current may be insufficient for
it to function normally. You must connect the power supply cord.
5)
The LED for power indication on 3656 CRADLE will become solid red.
6)
The scanner LED will be flashing red during charging.
When the charging is done, the LED will turn off.
When charging error occurs, the LED will turn solid red.
7)
The LED for communications on 3656 CRADLE will first become solid blue while
initializing. Refer to the table above for details on different stage of communications.
The two pivot bolts need to be tightened,
or charging error may occur.
or charging error may occur.