CipherLab Co. Ltd. 3666BASE ユーザーズマニュアル

 

21

6.    The system will display the all Bluetooth devices that are found in the range. 

The serial number of 1166/1266 will be displayed on the screen as the device 
name. In this case, the device name is SW300006. Double click the device, 
SW300006.   

 

 

7. Double click on the service, COM1 on SW3000006, which is the Bluetooth 
Serial Port service. This will enable the connecting process. If Authentication 
(Secure Connection) is enabled, another window might pop up and asking for PIN 
code. 

 

 

 

 

22

8.    Click OK button.                                                                                           

After successful connection, the Bluetooth Device Driver will report the COM 
port, which is mapped for this connection. In this case, it is COM3. You can 
also hear three serial ascending tones from the scanner indicating successful 
connection.  

After this initial connection, whenever an application program opens COM3, 
the Bluetooth driver will automatically try to connect this particular scanner. 

 

9.  Right click the COM1 on SW3000006 and select Disconnect to close the 
connection. There will be three serial descending tones from the scanner to indicate 
this condition. 

After the connection is closed, the 1166/1266 and the Bluetooth driver are properly 
configured and are ready to go. User can now run their application or “Hyper 
Terminal” for testing, and make the best use of this scanner.