The Watt Stopper Inc. DRD40 ユーザーズマニュアル
ADVANCED OPERATION
Groups
Use a Wireless Miro universal dimmer in conjunction with one or more Miro
DRD8 Wireless Multilocation Controllers to control one lighting circuit from
multiple locations. Binding the DRD40 and DRD8 devices together in the same
Group enables them to work in exactly the same way, from any of the control
locations.
DRD8 Wireless Multilocation Controllers to control one lighting circuit from
multiple locations. Binding the DRD40 and DRD8 devices together in the same
Group enables them to work in exactly the same way, from any of the control
locations.
You can include other Miro wireless devices in the Group. Just remember that
all devices in the Group operate when one member operates. If you increase
the brightness on one circuit in the Group, all circuits will increase brightness.
all devices in the Group operate when one member operates. If you increase
the brightness on one circuit in the Group, all circuits will increase brightness.
Set the House ID (see Set House ID) before setting up Groups.
Creating a New Group
1. Go to any device that you want to include in the Group. Press
. The device
LED fl ashes yellow, and all other devices in the house fl ash green.
You now have 5 minutes to complete this process.
You now have 5 minutes to complete this process.
2. To include or exclude a device in the Group press
on the device until the
LED changes color. Yellow fl ashing LED = Included in the Group
Green fl ashing LED = NOT included in the Group
If you get to a device and it is NOT fl ashing, the 5 minute binding process
timer may have expired. Go back to step 1 and repeat.
timer may have expired. Go back to step 1 and repeat.
3. Return to the device used in step 1 and press
to terminate Group binding.
All LEDs revert to solid green. Now, all the devices in the Group control their
load circuit in exactly the same manner.
load circuit in exactly the same manner.
Adding a Dimmer to a Group in an Existing System
1. Go to a device that is in the Group where you want to add the dimmer.
Press
. The device LED and all members of the Group flash yellow.
The new dimmer flashes green.
2. Press on the new dimmer until its LED flashes yellow.
3. Return to the device used in step 1 and press
. All LEDs are solid green.
Scene Control
The Miro Wireless Universal Dimmer may be easily incorporated into room
and whole house preset scenes. The Miro Installation Guide provides more
information about confi guring scenes and presets.
and whole house preset scenes. The Miro Installation Guide provides more
information about confi guring scenes and presets.
Instructions for installation and use are included with the relevant Miro
wireless room and whole house control devices. Application support
information and the Miro Installation Guide are available online.
wireless room and whole house control devices. Application support
information and the Miro Installation Guide are available online.
ii_DRD40_10346r2 090209.indd 1
ii_DRD40_10346r2 090209.indd 1
2/10/2009 3:04:31 PM
2/10/2009 3:04:31 PM