Boston Scientific Neuromodulation Corporation PSC1110W ユーザーズマニュアル

Physician Lead Manual

9. Using the torque wrench supplied, turn the extension connector

setscrew clockwise until it clicks, indicating lock.

Note: • Ensure that the wrench is fully seated in the setscrew before

tightening.

• The wrench is torque-limited and cannot be overtightened.

10. Form an appropriately-sized pocket using blunt dissection on

either side of midline for coiled excess lead and extension con-
nectors.

11. Place a small loop at the lead for slack. If necessary, loosely tie a

suture around the lead-loop, but do not tighten onto the lead.