ViVOtech Inc. VIVOPAY4800 ユーザーズマニュアル

ViVOpay 4800 User Guide

 4               

Installing the ViVOpay 4800

1.

Connect the data cable to the data port on the AVX connector.

Note: The MSR of the ViVOpay 4800m communicates at 19200 baud only. For other 
readers, use the Set Baud Rate command to change the default 115200 baud rate, if 
needed. See the ViVOpay Advanced Reader Interface Devevlopers Guide for more 
information. 

2.

Insert the power cable into the power connector.

3.

Connect the power supply to power.

The ViVOpay 4800 LEDs flash and the reader is ready to operate. If the reader fails to 
power up, see 

.

The ViVOpay 4800 can be mounted in the Countertop Stand for easier use. 

1.

Assemble the ViVOpay 4800 countertop stand by inserting the saddle into the base. Make 
sure to align the curved part of the saddle with the curved part of the base.

2.

For a permanent installation, you can fasten the stand base to the countertop with the 
provided screws. For a non-permanent installation, additional mounting solutions can be 
suggested. Please contact your local support representative for further information.

3.

Slide the bottom of the ViVOpay 4800 down into the saddle. Press the sides firmly until the 
tabs snap into place.