ViVOtech Inc. VIVOPAY8100 ユーザーズマニュアル

ViVOpay 8100 User Guide

 2               

Getting Started

The ViVOpay 8100 requires a data cable and a power supply if you are not powering the reader 
through the data cable. Verify that you have all the required components for the installation.

You may also need the following:

• Four M3 screws

If you want to secure the reader to a surface, you need four M3 screws of the appropriate length 
(not supplied).

• Contactless test card (

ViVOcard Contactless Test Card P/N 241-0015-03)

• Magnetic stripe test card

The ViVOtech data cables and power supply are specifically designed to meet FCC requirements. If 
you are using other cables or power supply, you must install ferrites available from ViVOtech. For 
your free ferrite core kit with installation instructions, please contact ViVOtech support.

The following accessories are available for the ViVOpay 8100. 

ViVOpay 8100 (P/N 540-0703-01)

Data cable (varies by POS and length)
• Serial Data Cable (P/N 220-2463-0X), requires 
separate power supply
• USB Data with Power Cable (P/N 220-2466-0X)

These cables are recommended and approved by 
ViVOtech to comply with FCC rules and regulations.

Power supply, if required
• US/North America (P/N 220-2476-00)

This power supply recommended and approved by 
ViVOtech to comply with FCC rules and regulations.

520-2370-00

Wedge Bracket Kit