ViVOtech Inc. VP4800M ユーザーズマニュアル
ViVOpay 4800 User Guide
4
Installing the ViVOpay 4800
To connect the ViVOpay 4800
1.
Connect the data cable to the modular connector.
Note: The baud rate for ViVOpay 4800 with the ViVOpay MSR Accessory is 19200
baud to match the baud rate of the MSR. The ViVOpay 4800 is set to 19200 by default
to be backward compatible with ViVOpay 4500 reader installations. For information on
how to change the baud rate, see the ViVOpay Advanced Reader Serial Interface
Developers Guide.
baud to match the baud rate of the MSR. The ViVOpay 4800 is set to 19200 by default
to be backward compatible with ViVOpay 4500 reader installations. For information on
how to change the baud rate, see the ViVOpay Advanced Reader Serial Interface
Developers Guide.
2.
Insert the power cable into the power connector.
3.
Connect the power supply to power.
The ViVOpay 4800 LEDs flash and the reader is ready to operate after about 35 seconds.
If the reader fails to power up, see
If the reader fails to power up, see
.
Mounting to the Countertop Stand
The ViVOpay 4800 can be mounted in the Countertop Stand for easier use.
To mount the ViVOpay 4800 in the Countertop Stand
1.
Assemble the ViVOpay 4800 countertop stand by inserting the saddle into the base. Make
sure to align the curved part of the saddle with the curved part of the base.
sure to align the curved part of the saddle with the curved part of the base.
2.
For a permanent installation, you can fasten the stand base to the countertop with the
provided screws. For a non-permanent installation, additional mounting solutions can be
suggested. Please contact your local support representative for further information.
provided screws. For a non-permanent installation, additional mounting solutions can be
suggested. Please contact your local support representative for further information.