Shenzhen Kirisun Communications Co. Ltd. PT810001 ユーザーズマニュアル

Accessories

Fixed bracket

Power Cable

Hand Microphone

Microphone Hanger

M4*10 Combination Screw

M4*16 Self-tapping Screw

M5*16 Self-tapping Screw

Instruction Manual

Fuse

1.1 Supplied Accessories

1.  Package-opened Inspection and Installing

Please check the radio in the package and the supplied acce-

ssories   in the following table before using. Any articles are 

found lost or damaged, please contact the distributor without 

delay.

1

2

Quantity

1.2  

1.2.1 
＊ 　

＊ 　

＊　
     

1.2.2 

＊ 

＊ 

Preparation

Connection of Power Cable

First  of  all,  please  check  whether  there  is  a  hole  for  the 

power  cable  on  the  insulating  board.  If  no,  please  bore  the 

board with the suitable drill bit and fix a rubber grommet on it. 

Afterwards,  please  have  the  cable  pass  through  the 

insulating  board  and  lead  from  the  car  into  the  car  engine. 

Connect  the  red  conductor  to  the  positive  terminal  of  the 

accumulator and the black conductor to the negative terminal.

 

At last, ring the remained conductor and fix it.

Radio Installing

The fixed bracket is taken as an example. Draw the position 

and drill a hole on the instrument panel first, and then install the 

fixed bracket with 4 M5*16 self-tapping screws. (Note: please fix 

the  radio  at  the  position  convenient  for  operation  and  control, 

and  leave  an  enough  space  for  fixation  and  connection  of  the 

cable.)

 

Slide the radio into the fixed bracket and fix it with 4 M4*10 

combination  screws  (plus  plain  washer  and  spring  washer). 

(Different  combinations  of  fixing  holes  are  selectable  to  adjust 

the radio to the proper height and visual angle.)

 

 

 

 

 

Fuse

Microphone 
Hanger

Power Cable

Hand
 Microphone

Fixed bracket

M4*10 
Combination 
Screw

M5*16 / M4*16 
Self-tapping
Screw

1

1

1

1

4

2

4

1

2