KROHNE FMCW80G74TA ユーザーズマニュアル
6
OPERATION
52
OPTIWAVE 7500 C
www.krohne.com
10/2016 - 4004375401 - MA OPTIWAVE 7500 R01 en
This is what you see when you select a menu item that has a value.
The functions of the buttons are given in the table that follows:
Function of buttons in menu items that have values
Values in menu items
Figure 6-6: Values in menu items
1 Menu item with values stored at this time (first screen). Push [>
>>
>] to enter the menu item. A cursor shows on the first
digit.
2 Push [>
>>
>] again and again to move the cursor. Push [
] or [
] to change the value of the digit. If the digit is part of a
number, then make a selection from 0...9. If the digit is part of a custom unit name, then refer to the tables at the end
of this section for a list of the available characters. If the cursor is on the decimal point, you can change the position
of the decimal point.
of this section for a list of the available characters. If the cursor is on the decimal point, you can change the position
of the decimal point.
3 Push [^
^
^
^] to set the new parameter and go back to the menu level
4 Make a selection: put the cursor on a digit or the decimal point.
5 Menu item name
6 The factory default value (left side) and factory default symbol (right side)
7 The minimun and maximum values (min./max.) for this menu item (left side) and min./max. symbol (right side)
8 A "tick" symbol shows that there is a new setting (the new setting is not saved at this time)
5 Menu item name
6 The factory default value (left side) and factory default symbol (right side)
7 The minimun and maximum values (min./max.) for this menu item (left side) and min./max. symbol (right side)
8 A "tick" symbol shows that there is a new setting (the new setting is not saved at this time)
INFORMATION!
If menu items have values that you can change, very large and very small values can be written
as a value with an exponent (b
If menu items have values that you can change, very large and very small values can be written
as a value with an exponent (b
n
). For example, if the value shown on the display is 100.00
+03
, this
value is equal to 100 × 10
3
or 100000.
Button
Description
Function
Right
•
Enter the menu item and see the value stored at this time.
•
Enter the menu item configuration level to change the value.
•
Move the cursor to the next digit on the right. If the cursor is on the
last digit, push [>>>>] again to go back to the first digit. You can also put
the cursor on the decimal point.
last digit, push [>>>>] again to go back to the first digit. You can also put
the cursor on the decimal point.
Enter / Esc
(Escape)
Accept the value and go back to the sub-menu.
Down
If the cursor is on a number, this button decreases the digit value. If
the cursor is on the decimal point, this button moves the decimal
point to the left (this decreases the value by a factor of 10).
Up
If the cursor is on a number, this button increases the digit value. If
the cursor is on the decimal point, this button moves the decimal
point to the right (this increases the value by a factor of 10).