Norsat International Inc. NSLK3200 ユーザーズマニュアル
Page 18
Norsat NewsLink
099-20003-01OM
Norsat
GPS Receiver Interface Panel
GPS Receiver
The GPS Receiver connector is a multi-pin amphenol female connector.
Baseband/IF Unit Functionality
The Baseband/IF unit performs the following functions:
•
Transmit power settings
•
Output power settings
•
Maintenance and indication
•
Setting transmission frequency
•
MPEG-2 encoding of user supplied video and audio
•
DVB-S compliant coding, interleaving, scrambling and modulation
•
Upconversion of the modulated signal to L-band
•
Reception of DVB-S compliant MPEG-2 TS
•
Display of transmitted video
•
Antenna pointing calculations
•
Spectrum Analyzer
The following sections provide descriptions and specifications for each of the
above listed functions.
above listed functions.
Transmit and Output Power Settings
The transmit power settings are controlled via the
T
RANSMITTER
C
ONTROL
panel
of the Norsat NewsLink GUI. The power can be entered manually, or via
transmit power quick keys which store assigned values for low and nominal
power. The low and nominal power levels of the for the quick keys are set in
the
transmit power quick keys which store assigned values for low and nominal
power. The low and nominal power levels of the for the quick keys are set in
the
T
RANSMIT
P
OWER
panel of the Norsat NewsLink GUI.
Maintenance and Indication
If the desired output power setting is above 25 dBm, for both the 15 W and 25
W SSPA, the output power level will be maintained at its current level inde-
pendent of temperature drift. However, if the desired output power level is
below 25 dBm, the actual output power level may fluctuate with temperature.
The Antenna Alignment screen of the Norsat NewsLink GUI indicates the sig-
nal strength.
W SSPA, the output power level will be maintained at its current level inde-
pendent of temperature drift. However, if the desired output power level is
below 25 dBm, the actual output power level may fluctuate with temperature.
The Antenna Alignment screen of the Norsat NewsLink GUI indicates the sig-
nal strength.
Transmission Frequency Setting
The transmission frequency setting is controlled via the
T
RANSMITTER
C
ONTROL
panel of the Norsat NewsLink GUI. The transmission frequency can be
entered manually, or via transmit frequency presets which store frequently
used transmit frequencies, and are set in the
entered manually, or via transmit frequency presets which store frequently
used transmit frequencies, and are set in the
F
REQUENCY
P
RESETS
panel of the
Norsat NewsLink GUI.