Chung Nam Electronics Co. Ltd. WLANTUBGR ユーザーズマニュアル
Q72WLANTUBGR 802.11b/g WLAN USB User Manual
- 10 -
2.3 Hardware Installation
1. Connect one end of the USB cable to the Adapter.
2. Connect the other end of the USB cable to the USB port on your computer. Because
the Adapter gets its power from the host, there is no external power supply. The LED
should light up when the Adapter is plugged in and the PC is on.
3 Configuration
CNE 802.11b/g Wireless USB Adapter can be configured by its utility. This chapter
describes how to configure your Wireless USB Adapter for wireless connectivity on your
Wireless Local Area Network (WLAN) and use the data security encryption features.
After the Adapter's driver and utility has been installed, the adapter’s tray icon
After the Adapter's driver and utility has been installed, the adapter’s tray icon
or
will appear in your system tray. It means the utility is running on your system. If the
utility does not run, you can run the utility by clicking:
Start> Program>RaLink
Wireless> RaLink Wireless Utility. If the icon still does not appear, the driver or utility
may be installed incorrectly or the adapter is unplugged, please try again.
Figure 3-1 start-up the Utility
Icon
means the connection has been established. Icon
means there is no
connection.
Double-click the icon
Double-click the icon
and the configuration screen of the utility will appear. You can
also run the utility by clicking:
Start> Program>RaLink Wireless> RaLink Wireless
Utility. The utility provides a complete and easy to use set of tools to:
Display current status information
Edit and add configured profiles
Display current diagnostics information
Edit and add configured profiles
Display current diagnostics information