Chung Nam Electronics Co. Ltd. WLANTUBGR ユーザーズマニュアル
Q72WLANTUBGR 802.11b/g WLAN USB User Manual
- 14 -
802.1x Setting – It enables when Authentication Type is setting to WPA.
Encryption – Displays which encryption type that the driver is using. When you select
Open System, Shared-Key System as Network Authentication, there are two options:
WEP and None. If you select WPA-PSK as Network Authentication, there are TKIP
and
AES options instead of WEP and None.
Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10
hexadecimal digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit
(also called 40bits) encryption. You can enter 26 hexadecimal digits (any combination of
0-9, a-f, A-F) or 13 ASCII characters for 128-bit (also called 104bits) encryption.
3.2 Link Status
The Link Status tab Figure 3-5 displays the adapter's current status.
Figure 3-5 Link Status
The following table describes the items found on the Network Status screen.
Status - Shows whether the station is connected to the wireless network, if not
connected, display
RF is closed; if connected, display AP name and BSSID.
Extra Info - Shows link status and the current channel in use.