Chung Nam Electronics Co. Ltd. WLC300GRM ユーザーズマニュアル
User Manual
11
Fragment Threshold – Default is 2312.
Ad-hoc mode – Displays the wireless mode, either Only 802.11B or 802.11B/G mode.
Channel – Shows the current channel in use. This field determines which operating
frequency will be used.
2. Edit the Authentication and Security tab
2. Edit the Authentication and Security tab
Figure 3-3 Add Profile – configuration
Authentication Type – Three options, Open System, Shared-Key System or LEAP.
802.1x Setting – It enables when Authentication Type is setting to WPA.
Encryption – Displays which encryption type that the driver is using. When you select
Open System, Shared-Key System as Network Authentication, there are two options: WEP
and
and
None. If you select WPA-PSK as Network Authentication, there are TKIP and AES
options instead of
WEP and None.
Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal
digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits)