Chung Nam Electronics Co. Ltd. WLC311NRM ユーザーズマニュアル
User Manual
- 8 -
installation. If you put the mouse cursor on top of the icon, a pop up message box
will indicate to you that the WLAN USB Adapter does not exist.
will indicate to you that the WLAN USB Adapter does not exist.
8.
Please plug in the WLC311NRM WLAN USB Adapter into your PC for the
hardware installation. If you want to understand the detail hardware installation
instructions, please refer to next section – Hardware Installation.
instructions, please refer to next section – Hardware Installation.
2.2.2 Hardware Installation
After successfully installation of the software driver, please plug the WLC311NRM
WLAN USB Adapter into your PC for WLAN card hardware installation. The OS
will detect the USB Adapter and find the appropriate driver automatically (In case it
does not, please follow the setup steps again as despite in Section 2.2.1) and the the
icon
will appear in your system icon box.
Figure 2-7 select the configuration of the WLAN USB Adapter
When you want to configure your WLAN USB Adapter, please right click the icon
, and a popup menu of Figure 2-7 will appear. You can click
Launch Config
Utilities to start the configuration. If you want to close configuration utility, please
click
click
Exit.
*
Note
:
If you want to stop configuration utility by clicking the
Exit, you’ll not
be able to maintain the current wireless link connectivity to the access.
You can start configuration utility again by clicking
Ralink Wireless Utility icon
from
Start -> All Programs -> Ralink Wireless -> Ralink Wireless Utility.