Chung Nam Electronics Co. Ltd. WLC312NR ユーザーズマニュアル

 

 

OEM installation Manual   

- 8 - 

box will indicate to you that the WLAN module does not exist.   

 

 

6.  Please plug the WLC312NR WLAN module into your PC for the hardware 

installation.    If you want to understand the detail hardware installation 
instructions, please refer to next section - Hardware Installation. 

 
 
2.2.2 Hardware Installation 
After successfully installation of the software driver, please plug the WLC312NR 
WLAN USB module into your PC for WLAN card hardware installation.    The OS 
will detect the module and find the appropriate driver automatically (In case it does 
not, please follow the setup steps again as despite in Section 2.2.1) and the the 

icon 

  will appear in your system icon box. 

 

Figure 2-5 select the configuration of the WLAN module 

When you want to configure your WLAN module, please right click the icon

, and 

a popup menu of Figure 2-5 will appear. You can click Launch Config Utilities to 
start the configuration.    If you want to close configuration utility, please click Exit. 

 

If you want to stop configuration utility by clicking the Exit, you’ll not be 

able to maintain the current wireless link connectivity to the access. 

 

You can start configuration utility again by clicking Ralink Wireless Utility icon 
from Start -> All Programs -> Ralink Wireless -> Ralink Wireless Utility. 
 
 
 

This section shows you how to configure the WLC312NR WLAN module in order to 
getting connection to a wireless access point. There are two kinds of ways that you 
can carry out this task: