Chung Nam Electronics Co. Ltd. WLC322NA ユーザーズマニュアル
OEM Manual
- 10 -
2.2.2 Hardware Installation
If you have been successfully installed the driver, please plugged the USB WLAN
Adapter into
If you have been successfully installed the driver, please plugged the USB WLAN
Adapter into
embedded computer system. The OS will automatically detect the USB
WLAN Adapter and automatically select the appropriate driver for Adapter. If it does
not, please follow the setup steps to finish the driver installation.
*Note: This is modular device intended to be use only for embedded system inside,
not, please follow the setup steps to finish the driver installation.
*Note: This is modular device intended to be use only for embedded system inside,
it can be used only to OEM device to a certain distance in which the module will not
directly expose to the end users. A
directly expose to the end users. A
nd can not be remove without professional guide!
Figure 2-12 the icon of the adapter
When you want to start to use this WLAN Adapter, please click on the icon
in
right-click, and a menu as Figure 2-13 will popup. Please select ‘Open Atheros
Client Utility’ to start configuration program. If you want to close configuration
utility, please click ‘Exit’.
Figure 2-13 the menu of adapter configuration
*
Note:
If you stopped configuration utility by ‘Exit’ function, you’ll not be able to
maintain the wireless link to the access point you wish to use.
In this case, you can
start configuration utility again by clicking: Start -> All Programs ->Atheros ->
Atheros Client Utility
Atheros Client Utility
Click Here