ZTE Corporation A605 ユーザーズマニュアル
36
TROUBLESHOO
TING
37
CARE AND MAINTENANCE
CARE AND MAINTENANCE
Your device is a product of superior design
and craftsmanship and should be treated
with care. The suggestions below will help
you protect your warranty coverage.
• Keep the device dry. Precipitation,
and craftsmanship and should be treated
with care. The suggestions below will help
you protect your warranty coverage.
• Keep the device dry. Precipitation,
humidity and all types of liquids or
moisture can contain minerals that will
corrode electronic circuits.
moisture can contain minerals that will
corrode electronic circuits.
• Do not use or store the device in dusty,
dirty areas. Its moving parts and electronic
components can be damaged.
components can be damaged.
• Do not store the device in hot areas.
High temperatures can shorten the life of
electronic devices, damage batteries, and
warp or melt certain plastics.
electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form inside
temperature, moisture can form inside
the device and damage electronic circuit
boards.
boards.
• Do not attempt to disassemble the device.
• Do not drop, knock, or shake the device.
• Do not drop, knock, or shake the device.
Rough handling can break internal circuit
boards and fine mechanics.
boards and fine mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the device.
the device.
• Do not paint the device. Paint can clog
the moving parts and prevent proper
operation.
operation.
• Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attachments
could damage the device and may violate
regulations governing radio devices.
antennas, modifications, or attachments
could damage the device and may violate
regulations governing radio devices.
All of the above suggestions apply equally
to your device, battery, charger,
to your device, battery, charger,
Troubleshooting
1. LED indicator not lighting up
• Check if A605 is inserted into USB port
correctly.
• Re-insert A605 into the USB port
(Forcing A605 into the USB port may
cause considerable damage).
cause considerable damage).
• Insert A605 into another USB port.
2. Error occurs when running
Cricket Broadband
• Check if Cricket Broadband is installed
correctly.
• Reinstall the Cricket Broadband or
Reboot the PC.
3. CM displays “No device” on status bar
• Check to ensure that A605 is inserted in
USB port correctly.
• Check if the USB driver is installed
correctly.
• Wait until status changes to
“Disconnected”, it may take a minute.
3. Internet connection fails
• Check if no signal strength LED.
• Check if the modem is activated.
• Check if the modem is activated.
If you have additional support questions
about your Cricket A605 modem, please call
1-800-CRICkET.
about your Cricket A605 modem, please call
1-800-CRICkET.