Linksys CG2P2WB ユーザーズマニュアル

18

 

2. In 

the 

Wireless Network Properties window, configure the settings below: 

Network name (SSID): Specifies the name of the Wireless LAN group you want to 
participate in.   

Network Authentication (Shared mode): Specifies the authentication type. You should 
use the same setting as the other wireless stations in your target wireless network. 

Wireless network key (WEP): If a network key is required, do the following:   

• 

  If the WEP key is automatically provided (for example, the key is stored on the 

wireless network adapter given to you by your network administrator), check 
The key is provided for me automatically check box. 

• 

  If the WEP key is not automatically provided for you, leave The key is provided 

for me automatically check box blank and then enter the key in the Network 
key field.  

When entering the key, the Key format and Key length are changed automatically 
according to the format and length of the characters you entered. When using 
Hexadecimal format, only digits 0-9 and letters a-f, A-F are allowed. Make sure to enter 
the character matching the required key format and length as below: 

 

ASCII characters 

Hexadecimal digits 

40 bit 

5 alphanumeric characters 

10 hexadecimal digits 

104 bit 

13 alphanumeric characters 

26 hexadecimal digits