Linksys WAP200 ユーザーズマニュアル
26
Chapter 6: Configuring the Wireless-G Access Point
The Wireless - VLAN & QoS Tab
The Wireless - VLAN & QoS Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Fragmentation Threshold. This specifies the maximum size a data packet can be before splitting and creating a
new packet. It should remain at its default setting of 2346. A smaller setting means smaller packets, which will
create more packets for each transmission. If you experience high packet error rates, you can decrease this
value, but it will likely decrease overall network performance. Only minor modifications of this value are
recommended.
new packet. It should remain at its default setting of 2346. A smaller setting means smaller packets, which will
create more packets for each transmission. If you experience high packet error rates, you can decrease this
value, but it will likely decrease overall network performance. Only minor modifications of this value are
recommended.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is available on the right side of the screen.
Changes to cancel your changes. Help information is available on the right side of the screen.
The Wireless - VLAN & QoS Tab
This screen allows you to configure the VLAN and QoS related settings for the Access Point.
VLAN
The following options are global VLAN settings for the Access Point.
VLAN. Select Enabled if you want to pass 802.1q VLAN tagged traffic between the wired LAN and wireless LAN.
Your Access Point will map the VLAN tag (wired side) to different SSIDs (wireless side) according to your specified
settings. Select Disabled and your Access Point will drop all tagged traffic coming in from the wired LAN. The
default is Disabled.
Your Access Point will map the VLAN tag (wired side) to different SSIDs (wireless side) according to your specified
settings. Select Disabled and your Access Point will drop all tagged traffic coming in from the wired LAN. The
default is Disabled.
Default VLAN ID. Enter the VLAN ID number, the default VLAN is 1.
VLAN Tag. Untagged is the default and should be used if the VLAN ID does not carry a tag. Otherwise, select the
Tagged option.
Tagged option.
AP Management VLAN. When the VLAN option is enabled, the value entered (VLAN ID) in this field defines the
VLAN that can connect to the Access Point's web-based utility. The default setting is VLAN 1.
VLAN that can connect to the Access Point's web-based utility. The default setting is VLAN 1.
QoS
The following options are VLAN global settings for the Access Point.
Default CoS (Priority). Select Enabled if you want to assign a default CoS value to each SSID. This option is
automatically enabled when the VLAN option is enabled. The default is Disabled.
automatically enabled when the VLAN option is enabled. The default is Disabled.
U-APSD (Unscheduled Automatic Power Save Delivery). This option is only available when WMM is enabled
on any of the SSIDs. Select Enabled if you want client devices with U-APSD capability to take advantage of the
power save mode. The default is Disabled.
on any of the SSIDs. Select Enabled if you want client devices with U-APSD capability to take advantage of the
power save mode. The default is Disabled.
Figure 6-16: Wireless - VLAN & QoS