Mobilicom ltd. MCU-30 ユーザーズマニュアル
MCU-30 User Manual
Page : 38 / 51
This page contains information which is protected by copyright and is proprietary to Mobilicom Ltd.
No part of this document
may be used, copied, disclosed or conveyed to another party without prior written consent of Mobilicom Ltd
12 Installation and Setup
12.1 Package Contents
MCU-30
2 Detachable Antennas
12.2 Connecting the Antennas
Antennas installation vary in size, shape, requirements and mounting method. The
antennas should be as close to the MCU-30 as possible and can be
connected to it directly. Recommended distance between antennas is ~1.5m (for
2.XGHz).
antennas should be as close to the MCU-30 as possible and can be
connected to it directly. Recommended distance between antennas is ~1.5m (for
2.XGHz).
Cables should be chosen according to their attenuation (lower attenuation gives
better results) and flexibility (according to the path they pass through). Each
cable should have SMA Male connector on the MCU end, and a connector matching
to the antenna
better results) and flexibility (according to the path they pass through). Each
cable should have SMA Male connector on the MCU end, and a connector matching
to the antenna
’s connector on the other. Recommended cable standards can be
supplied by Mobilicom.
12.3 Connecting the Power
The MCU-30 has a dual power feed enabling hot-swap battery replacement during
operation.
operation.
CAUTION – Powering up an MCU unit without connecting the
antennas can cause unrepairable damage to the MCU.
antennas can cause unrepairable damage to the MCU.