Cardo Systems ER01 ユーザーズマニュアル
scala-rider manual
DRAFT APRIL 25, 2005
Page 19 of 31
9
Operating the remote control
The remote control has two buttons which can be easily operated by a
short movement of the left hand finger.
1. CTRL_RC.
2. Radio_RC.
9.1 CTRL_RC
short movement of the left hand finger.
1. CTRL_RC.
2. Radio_RC.
9.1 CTRL_RC
button
usage
9.1.1 Power Off
While your phone is ON but no call is in progress, press the
CTRL_RC button for 3 seconds. You will hear a descending tone as
the headset turns OFF. This will turn off the headset and the radio. In
order to turn ON the headset you must use the CTRL button on the
headset itself.
CTRL_RC button for 3 seconds. You will hear a descending tone as
the headset turns OFF. This will turn off the headset and the radio. In
order to turn ON the headset you must use the CTRL button on the
headset itself.
9.1.2 Initiate voice dial
While your phone is ON but no call is in progress, tap the CTRL_RC
button. Wait for a sound and speak the name of the party you wish to
call and wait for feedback from the phone. The type of feedback
depends on your phone.
button. Wait for a sound and speak the name of the party you wish to
call and wait for feedback from the phone. The type of feedback
depends on your phone.
9.1.3 Answering Calls
When you hear the ring tone either on the headset or on the phone,
tap the CTRL_RC to answer the call.
tap the CTRL_RC to answer the call.
9.1.4 Terminating Calls
To terminate a call, tap the CTRL_RC button, followed by a tone,
which confirms the termination. Wait at least three seconds before
pressing again the CTRL button to activate voice dial.
which confirms the termination. Wait at least three seconds before
pressing again the CTRL button to activate voice dial.
9.1.5 Rejecting Calls
CTRL_RC-
Accept/ terminate calls
Voice dial
Accept/ terminate calls
Voice dial
Radio_RC-
Radio ON/OFF
Changing radio stations
Radio ON/OFF
Changing radio stations