DM Technology Co. Ltd. IS07N ユーザーズマニュアル

ページ / 28
English
10
Using the Internet Radio
Putting the radio into standby mode
If you are not using the radio for an long period, you can
conserve the radio power by putting it into standby mode.
When in standby mode the clock will be shown on the
display.
1. When the radio is on, press POWER(
and the clock
will be displayed.
Or
When the radio is off, press POWER(
). The radio will
take 30 seconds to start playing again, as it finds the radio
station you were last connected to. But if AC adaptor is
unplugged at the DC input, the radio will take up to 60
seconds to start playing when plugged into DC jack again.
• Choosing a radio station to listen to
1. Press the SELECT  button to return to the top-level menu.
(Note: if you make a mistake at any point, press the
BACK button to go back to the previous screen.)
2. If the screen does not say < Stations > as shown above,
turn the knob until it does.
3. Press the SELECT button.
4. Turn the knob to choose from <Location> or <Genre>.
<Location> enables you to choose from the radio stations
provided by any country which you choose from a list.
<Genre> enables you to choose radio stations according to
their content, for example Classic, Rock, Sport, News, etc.
5. Press the SELECT button to choose the option you want.
<Location>
1. Turn the knob until the display shows the region you
want, then press the SELECT button.
2. Turn the knob until the display shows the country you
want, then press the SELECT button.
3. Turn the knob until the display shows the station you
want, then press the SELECT button and wait until the
radio connects to that station.
<Genre>
1. Turn the knob until the display shows the type of
content you want, then press the SELECT button.
2. Turn the knob until the display shows the station you want.
3. Press the SELECT button and wait until the radio
connects to that station.
Note that some radio stations do not broadcast 24
hours per day, and some stations are not always
on-line. If this station has on-demand content (that
is, it gives the option of listening to programs
which have already been broadcast), see “Stations
which enable you to choose what you listen to”.
Changing the volume
Whilst a radio station is playing and is displayed on the
radio’s screen, you can change the volume simply by
turning the knob. 
If a radio station is being played and the Internet Radio is
in its menu-browsing state, then you can change the
volume if you keep pressing the BACK button until the
radio leaves its menu and displays the current station and
then turn the knob.
Returning to the menu while a station is playing
When the Internet radio is playing a radio station it will
display the station’s name and bit rate. You can return to
the radio’s menu section at any time by either pressing the
SELECT button – which will take you to the ‘Stations’
menu - or the BACK button to return to the previous
menu item.
• Storing a radio station in a preset
Whilst a radio station is playing, hold down one of the
preset buttons (numbered 1 to 10) until the screen says
Where # is the number of the button you held down.
Playing a preset radio station 
When a radio station is playing, briefly press one of the
preset buttons, to 10, for the station you want.
(Note, do not hold the button down - if you do then the
station currently playing will overwrite the one stored in
the preset; be careful).
Requesting a station that is currently unavailable
If you want to listen to a particular radio station which is
currently not available online, you can visit the Reciva
website at http://www.reciva.com/ and put in a request
to add the station to the list.
Assigned to 
Preset #
Stations