SendFar Technology Co. Ltd. OAB-03001 ユーザーズマニュアル

Version 1.00 

16

 
Select “F -- upgrade Flash memory” and it will display upgrade items for 
selection as shown in following figure.  
 

 

 
Firstly, select “3:SOHO” and then select “4:WEBIMG” to update the 
firmware files one by one. 
 
After you press “3” keystroke and make sure the window start to display “C” 
character continued, meanwhile click Transfer and select the new firmware 
files (soho.bin), then press OK to start to transfer file to SF-3000. After the 
upgrade finished, remember to press “R” keystroke to reboot the sytem. 
 
The following is to select “4” to upgrade WEBIMG file. The procedures are 
all the same with upgrading SOHO file, but you should select (pfs.img) 
correctly for WEBIMG file upgrade. 
 

After you have configured the SF-3000, you can back-up its configuration 
files. Then you can download the back-up files at a later date and return the 
SF-3000’s configuration to the settings specified in back-up files. 

Version 1.00 

17

 
- Downloading Configuration Files 
 
Just same with upgrade firmware procedures, after the prompt character 
NetARM> is displayed, select “S – Save image to file” and then select 
“6:CONFIG” to back-up the SF-3000’s configuration as shown in following 
figure. The back-up file will be saved as “CONFIG.IMG”. 
 

 

 
- Uploading Configuration Files 
 
If you want to upload an configuration file to SF-3000, you should select “F -
- upgrade Flash memory” and then select “6:CONFIG”. Make sure the 
window start to display “C” character continued, meanwhile click Transfer 
and select the CONFIG.IMG, then press OK to start to transfer file to SF-
3000.