Controlled Electronic Management Systems Ltd INFOPROX ユーザーズマニュアル
InfoProx Entry
Card Management
To search for all card records from the highest number
1.
Press 2 on the Find prompt, as shown below.
0-HSTMP, 1-SWIPE
2-ALL CARDS
2-ALL CARDS
This changes the screen to the following:
From 1st-1
Last-9, HstNo-2
Last-9, HstNo-2
2.
Press 2 (HstNo) to initiate a search by entering a hotstamp number on
the keypad. If the hotstamp number is less than eight digits, the number
must be preceded with zeros (0). Use
the keypad. If the hotstamp number is less than eight digits, the number
must be preceded with zeros (0). Use
Ù at any time to correct errors
when entering the number.
When the card has been successfully found, the hotstamp number, the
PIN, and the card record number display.
PIN, and the card record number display.
3.
Use keys 1 and 2 to step through the database (down and up,
respectively).
respectively).
If the hotstamp number is not found, the display reverts to the I/P NUM
prompt.
prompt.
Diagnostic Tests
To run a diagnostic test
1.
Press
Ù when in the Administration menu to display the remaining
available menus.
4-Diag, 5-Pword
6-Backup
6-Backup
2.
Press 4 to access the Diagnostic Test option, which allows a range of
functional tests of the reader to be performed. (See section 5 for
details).
functional tests of the reader to be performed. (See section 5 for
details).
Software House
53