Corecess Inc. CORECESS3115 ユーザーズマニュアル
11
PHONE
LINE
LAN
OFF
ON
5V DC
1
2
3
PHONE
LINE
LAN
OFF
ON
5V DC
1
PHONE
LINE
LAN
OFF
ON
5V DC
Basic Procedure of Cabling
Connecting ADSL Line (LINE Port)
If the Corecess 3115 doesn’t have the PHONE port:
n
Unplug the telephone line from the wall receptacle and plug the line end of the micro-filter to
the wall phone jack.
the wall phone jack.
o
Connect the telephone cable that was unplugged
from step 1 to the
from step 1 to the
Phone
port of the micro-filter.
p
Connect the provided phone/DSL cable to the
Modem
port of the micro-filter and then connect the
other end of the cable to the
LINE
port of the
Corecess 3115.
<위 그림에서 PHONE 포트를 삭제해주세요.>
If the Corecess 3115 has the PHONE port:
Unplug the telephone line from the telephone and
plug the line to the
plug the line to the
LINE
port of the Corecess 3115.
Connecting PC (LAN Port)
If you use the Ethernet adapter, connect the provided
Ethernet cable to the
Ethernet cable to the
LAN
port of the Corecess 3115 and
then connect the other end of the cable to
Ethernet
port on
the NIC installed to your PC.
<위 그림에서 PHONE 포트를 삭제해주세요.>
Note: If you are connecting a LAN to the Corecess 3115, you must use a “crossover” Ethernet cable
(not provided) to attach a regular hub or switch port. The crossover cable is wired differently than the
cable you would use to connect to a hub. When you compare the colored wires on each end of a
straight-through cable, they will be in the same sequence; on crossover cables, they will not. Contact
your ISP for assistance.
(not provided) to attach a regular hub or switch port. The crossover cable is wired differently than the
cable you would use to connect to a hub. When you compare the colored wires on each end of a
straight-through cable, they will be in the same sequence; on crossover cables, they will not. Contact
your ISP for assistance.