VESSCO inc TX-300F ユーザーズマニュアル
7
F. PIN NUMBER SETTING
1. In the PROGRAM mode.
2. Insert PASS NUMBER (Default “0000”) and press # button.
3. Press new PASS NUMBER that you desire (0000~9999) (Default
2. Insert PASS NUMBER (Default “0000”) and press # button.
3. Press new PASS NUMBER that you desire (0000~9999) (Default
“0000”).
4. Press the ME button and press “*5” key.
G. TO RECORD OUT GOING MESSAGES
SECUMAN can play back one or two outgoing messages of up to
32seconds (32seconds can be divided into two out going messages).
When recording a message, take in a normal voice about 10 inches from
the SECUMAN
32seconds (32seconds can be divided into two out going messages).
When recording a message, take in a normal voice about 10 inches from
the SECUMAN
1. In the PROGRAM mode.
2. Insert PASS NUMBER (Default “0000”) and press # button.
3. Press dial key “1” to specify the first voice message, or press dial
2. Insert PASS NUMBER (Default “0000”) and press # button.
3. Press dial key “1” to specify the first voice message, or press dial
key “2” to specify the second voice message.
4. To record, press and hold the “VOIVE” button down to initiate the
recording process. The word “VOICE” will appear in the LCD
during recording. The “VOICE” button must be held down for the
entire time of the recording.
during recording. The “VOICE” button must be held down for the
entire time of the recording.
5. As soon as the voice key is released or when 16 seconds have
passed. The word “VOICE” will disappear from the LCD. This
indicates that the message is stored.
indicates that the message is stored.
6. If you wish to change either outgoing message, repeat steps 1
through 5. The previous message will be replaced when the new
message is recorded.