Tel-Tron Technologies Corporation WUTA ユーザーズマニュアル
Universal
Transmitter
Wireless Series
Description
Tel-Tron universal transmitters allow for wireless activa-
tion of an alarm from anywhere within a resident apart-
ment or common area. These tranmitters can be used within
a full wireless system, within a telephony system, or as an
added feature to a Direct Connect system.
tion of an alarm from anywhere within a resident apart-
ment or common area. These tranmitters can be used within
a full wireless system, within a telephony system, or as an
added feature to a Direct Connect system.
Universal transmitters, when activated, send a signal to
either a WRMA wireless receiver on a wireless system, to
a TVTA or TVCA which acts as a wireless receiver on a
telephony based system, or a WARB wireless receiver on
a Direct Connect system.
either a WRMA wireless receiver on a wireless system, to
a TVTA or TVCA which acts as a wireless receiver on a
telephony based system, or a WARB wireless receiver on
a Direct Connect system.
The universal transmitter is activated by triggering the pro-
grammable input channel, which is connected to an exter-
nal dry contact at installation. The universal transmitter
also contains a programmable tamper switch which can
detect the fact that the cover has been removed - a feature
useful in dementia-care operations where the resident may
attempt to tamper with the device in an effort to avoid de-
tection during egress.
grammable input channel, which is connected to an exter-
nal dry contact at installation. The universal transmitter
also contains a programmable tamper switch which can
detect the fact that the cover has been removed - a feature
useful in dementia-care operations where the resident may
attempt to tamper with the device in an effort to avoid de-
tection during egress.
The WUTA is activated by an open on a normally closed
contact or a close on a normally open contact. Either con-
figuration may be selected with the use of a shunt. (See
Shunts
contact or a close on a normally open contact. Either con-
figuration may be selected with the use of a shunt. (See
Shunts
on reverse side).
The WUTA-RS operates just the same as a standard WUTA
but also includes a reed switch, which uses a door mount
magnet to create a close.
but also includes a reed switch, which uses a door mount
magnet to create a close.
The WUTA-DB is used in door bell applications and in-
cludes the push button and single-gang fixture.
cludes the push button and single-gang fixture.
© 2009 Tel-Tron Technologies Corporation - Doc.WUTA.
WUTA / WUTA-RS
Universal Transmitter
Compatibility
Wireless System
WRMx
Wireless Receiver
WAPA
Wireless Network Access Point
Telephony System
TVTA
CarePartner Telephone
TVCA
PhoneMate Communicator
Direct Connect System
WARx
Wireless Receiver
WUTA-DB
Door Bell Transmitter
FCC ID: QE2-WECA
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
Conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Rules. Operation is subject to the following two
Conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Tel-Tron Technologies Corporation
226 Fentress Boulevard
Daytona Beach, FL 32114
(386) 255-1921 • Fax (386) 258-3782
www.tel-tron.com
info@tel-tron.com
info@tel-tron.com